The liquid colour is composed of the pigment and the flow-dynamic polymer, which is perfectly compatible with the plastic substrate, and ensures the uniform dispersion of the pigment through a multi-stage process.
York specializes in the production of high concentration of liquid colour , pigment particles are gradually refined after multiple processes of grinding and high strength shear , large particles be crushed to ensure the dispersion of the pigment particles, which improve the covering force and dyeing force of the pigment. High concentration of liquid colour reduces liquid colour consumption.
Food and beverage packaging, cosmetics packaging, baby supplies, daily necessities, electrical appliances and other plastic products
Liquid colour is added automatically without manual mixing
Good stability, without chromatic aberration; good dispersion, without colour point
high active ingredient content ， low addition ratio
High concentration , inexpensive but useful goods
Changing colour is easy, save the cost of colour change
No subscription limit, to avoid inventory
Manufacturing process has no heating process, to avoid substrate degradation than affecting material properties
On-site colour mixing and production of liquid colour, to meet the needs of customers at high speed
| Granulating material |
toner |
Color masterbatch |
Liquid masterbatch |
|
|
dispersion |
Very Good |
Colour spots |
Good |
Very Good |
|
Colour stability |
Very Good |
unstable color |
Sometimes layered |
Very Good |
|
Automation |
Feasible |
Not feasible |
Feasible |
Feasible |
|
Colour change |
Easy |
Difficult (polluted) |
Easy |
Easy |
|
economy |
expensive |
cheap |
expensive |
less expensive |
Quantitative addition of liquid colour was performed by compression and expansion of the metering pump cavity
CTS5000-YKPP Suitable for frequent colour changing
| CTS5000-YKPP | CTS5000-GB | |
|
Metering pump |
plastic pump |
steel pump |
|
power（W） |
300 | 400 |
|
power supply（V） |
220 | 220 |
|
outline dimension（mm） |
600*400*1150 | 600*400*1150 |
|
Weight（KG） |
30 | 33 |
Bring an electronic weighing sensor, automatically correct the add amount
Real-time online tracking, active correction, and precise addition
Multi-function alarm
Production statistical function
| CTS6000-TS | CTS6000-LD | |
|
usage scenario |
Desktop equipment |
Ground-floor equipment |
|
metre fullscale （KG） |
40 | 40 |
|
power（W） |
300 | 300 |
|
power supply（V) |
220 | 220 |
|
outline dimension (mm) |
380*320*250 | 500*600*700 |
|
Weight (KG) |
30 | 50 |
The metering valve is placed between the hopper and the pre-mixer to measure the amount of plastic added, and each time the plastic in the glass container is quantitatively added to the pre-mixer. Avoid the impact on colour stability due to material recycling or discharge. Product size 230 * 550 * 190mm, air pressure 3-4 kg.
The pre-mixer is placed between the hopper and the inlet. After high-speed stirring, the liquid masterbatch will be mixed with the plastic very evenly, which lays a good pre-treatment effect for the plastic particles before entering the plastic processing machine. Compared with traditional masterbatch, the dispersion is more uniform, and the colorant and plastic particles will not be delaminated due to vibration, which ensures the stability of the colour.
| PM-1 | PM-2 | PM-5 | PM-10 | |
|
Carrying capacity for PP/kg |
1.0 | 1.3 | 2.8 | 5.3 |
|
Power（W）
|
250 | 250 | 750 | 750 |
|
Power supply（V) |
220 | 220 | 380 | 380 |
|
outline dimension (mm) |
380*320*230 | 360*360*270 | 500*480*270 | 500*500*320 |
|
Weight (KG) |
24 | 41 | 41 | 34 |
